Electronic Combination Lock DIY Kit
Featuring the LS7222 - 4 MCU Arduino Control
This is a listing for an electronic combination lock kit that we developed using the LS7222 combination lock IC as a platform. When you purchase this kit, we will send you a PCB, and all the parts required. Instructions for assembly are all given in the video above. There is also a demonstration in the video on how to use the kit with your MCU. We also briefly talk about the data sheet circuit, and talk about how you can go about manipulating the functionality of the circuit by changing some passive components on the board. The instructions are ALL in the video, so if you're interested, have a look. WE ALSO SELL THESE ASSEMBLED! Just look through our store! If you have any questions, send us a message!
This kit includes:
1) A Custom PCB (Printed circuit board).
2) All of the components required to build the kit.
3) Round the clock access to the instructional video =) We will send a piece of paper with a reminder of how to view the instructional video on our website.. Or... You can just come back to this listing and see it again here!
Kit Features:
1) Twelve digit kepyad matrix
2) User programmable option (user can program and reprogram at will)
3) Three codes: ARM/DISARM/DURESS
4) Five output lines for MCU interface (ARM/DISARM/LOCK/TAMPER/ALARM)
5) Regulated 5v output pin and ground pin for peripheral interfacing
6) LOCK output can be interfaced with our DIY relay kit to activate AC power devices.
Datasheet:
http://www.datasheetcatalog.com/datasheets_pdf/L/S/7/2/LS7222.shtml
Requirements:
1) Power Supply: 7VDC - 25VDC (regulated to 5VDC on the board)
2) Basic soldering skills.
3) Attention to detail. Some kit assembly experience is helpful.
Applications:
Security systems
Door Locking devices
Safe circuitsUse your imagination!
This kit includes:
1) A Custom PCB (Printed circuit board).
2) All of the components required to build the kit.
3) Round the clock access to the instructional video =) We will send a piece of paper with a reminder of how to view the instructional video on our website.. Or... You can just come back to this listing and see it again here!
Kit Features:
1) Twelve digit kepyad matrix
2) User programmable option (user can program and reprogram at will)
3) Three codes: ARM/DISARM/DURESS
4) Five output lines for MCU interface (ARM/DISARM/LOCK/TAMPER/ALARM)
5) Regulated 5v output pin and ground pin for peripheral interfacing
6) LOCK output can be interfaced with our DIY relay kit to activate AC power devices.
Datasheet:
http://www.datasheetcatalog.com/datasheets_pdf/L/S/7/2/LS7222.shtml
Requirements:
1) Power Supply: 7VDC - 25VDC (regulated to 5VDC on the board)
2) Basic soldering skills.
3) Attention to detail. Some kit assembly experience is helpful.
Applications:
Security systems
Door Locking devices
Safe circuitsUse your imagination!